MET ONE 6015P Remote with Pump (Serial Interface, AC Power)
The MET ONE 6015P adds serial communication and an integrated relative humidity and temperature port. This port enables the use of an optional probe that includes RH/Temp data along with the particle count data stream to further simplify installation and increase the information your monitoring system provides.
The MET ONE 6000P series remote airborne particle counter offers accurate and reliable continuous particle monitoring. With a sensitivity range of 0.5 to 10 μm, the MET ONE 6000P series is designed to meet the specific needs of cleanroom operations within the pharmaceutical, semiconductor, hard disk drive and flat panel display industries. With an array of industry leading features and simplified installation options, the MET ONE 6000P is easy to integrate with any facility monitoring system. These features also reduce downtime for instrument removal and reinstallation during routine calibration and preventative maintenance cycles. Built with Long Life Laser technology, the MET ONE 6000P offers enhanced diagnostic features that reduce troubleshooting time and related downtime costs.
|Performance||ISO 21501-4 unit-to-unit accuracy & reproducibility|
|Industry Standards||ISO 21501-4 , ISO 14644-1:2015, FCC, CE|
|Light Source||Long Life Laser™ Diode|
|Particle Size Analysis Range||0.5 - 10 μm|
|Coincidence Loss||10% at 20,000,000 particles/m3|
|Sample Volume||10 µm|
|Throughput||28.32 L per minute|
|Interfaces & Protocols||RS-485, RS232, Modbus RTU Communication Protocol | FXB Communication Protocol|
|Data Storage||1,000 samples (oldest records overwritten when buffer is full)|
|Threshold Setting||0.5 µm|
|Pump Type||Air vacuum, rated for continuous use|
|Zero Count||ISO 21501-4 & JIS B 9921 (1 count or less in 5 min; 95% UCL)|
|Count Alarms, Display & Cycles||User-defined alarm counts displayed via LED on box or remote LED|
|Environmental Conditions||Indoor Environment|
|Temperature Range||Operating temperature range: 10°C to 32°C, Storage temperature range: -40 to +70°C|
|Humidity Restrictions||80% (non-condensing)|
|Requisitos energéticos||100-240 VAC, 50/60 Hz, 0.4 A Max|
|Software||Integrates with various software platforms for facility monitoring|
|Operating Modes||Automated or remote sampling|
|Weight||4.6 kg / 10.1 lb|
|Width||17.2 cm / 6.8 in|
|Depth||31.8 cm / 12.5 in|
|Height||11.5 cm / 4.5 in|
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.