MET ONE 7015 Washdown Enclosed, Flow Meter, Ethernet Interface, North America AC Power

2088715-NF-EA-B


The 7015 remote air particle counter provides high accuracy non-viable particle monitoring for cGMP/FDA compliance. Stainless steel wash-down resistant enclosure and VHP tolerant optics protect the instrument while ISO 21501 certified calibration assures accurate continuous monitoring in aseptic and sterile pharmaceutical production environments. Rugged design for cleanroom use with Industry leading particle counting on-line reliability. ISO 21501 compliant with built-in flow sensor for CFR21 data accuracy and reliability. Communication and mechanical specs include Ethernet with TCP/IP protocol and standard two-channel 0.5 μM at 1.0 CFM, with flow. A/C and B power cord. No pump. Includes aa ASSY upgrade.

Especificações

Platform APC Instruments
Performance ISO 21501-4 unit-to-unit accuracy & reproducibility
Industry Standards ISO 21501-4 , ISO 14644-1:2015, CE, FCC
Light Source Long Life Laser™ Diode
Particle Size Analysis Range 0.5 - 10 μm
Flow Rate 28.32 L per minute
Coincidence Loss 5% at 14,000,000 particles m/3
Sample Volume 10 µm
Throughput 28.32 L per minute
Interfaces & Protocols Ethernet with Modbus TCP protocol
Data Storage 1,000 samples (oldest records overwritten when buffer is full)
Zero Count ISO 21501-4 & JIS B 9921 (1 count or less in 5 min; 95% UCL)
Count Alarms, Display & Cycles User-defined alarm counts displayed via LED on box or remote LED
Environmental Conditions Indoor washdown environment
Temperature Range Operating temperature range: 10°C to 32°C, Storage temperature range: -40 to +70°C
Humidity Restrictions 5%-95% (non-condensing)
Requisitos energéticos 100-230 VAC, 50/60 Hz, 8.9 W (maximum)
Software Integrates with various software platforms for facility monitoring
Operating Modes Automated or remote sampling
Pollution Degree 2
Autoclavable No
Nonpyrogenic Yes
Weight 4 kg / 8.8 lb
Width 22.9 cm / 9 in
Depth 12.5 cm / 4.9 in
Height 16 cm / 6.3 in
Color Silver
Package Quantity 1

Customers Also Viewed

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.