Avanti® J-E BioSafe Centrifuge System, 50 Hz, 230 V
|Maximum Speed||21,000 rpm|
|Acceleration||2 profiles, Maximum (full accleration to set speed) & Slow|
|Deceleration||3 profiles (max, slow & off (coast)|
|Speed Control||± 50 rpm of set speed|
|Timed Run||1 minute-99 hours, 59 minutes or Continuous Hold|
|Max Capacity Volume Range||1 - 4 L|
|Refrigeration System||Non-CFC, non-ozone depleting refrigerant|
|Drive Type Cooling||SR Drive* / Air cooled|
|Temperature Range(s)||From -10°C to +40°C in 1° increments|
|Environmental Conditions||-10°C to 40°C in 1° increments|
|Software||Virtual Network Computing (VNC), Mobile Fuge app for Apple iOS and Android|
|Material(s)||Steel, Structural Foam|
|Finish||Control Panel: Silicone elastomer, Top Surface: Urethane paint, Other surfaces: General purpose paint|
|Weight||267.4 kg / 589.5 lb|
|Width||63.5 cm / 25 in|
|Depth||80.0, cm / 80.0, in|
|Height||91.4 cm (152.4 cm with door open)|
|Clearances||7.6 cm (sides) & 16 cm (rear)|
|Humidity Restrictions||< 95% (non-condensing)|
|Requisitos energéticos||230 VAC, 50/60 Hz|
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.