HIAC PODS+ STD 2.8 with Moisture Sensor

B95073


HIAC PODS+ STD 2.8 portable liquid particle counter with moisture sensor provides proactive and predictive maintenance information instantly. Sample low or high viscosity fluids and report data to ISO 4406, NAS 1638, NAVAIR, GOST, or SAE AS4059 reporting standards. With an integrated internal pump eliminating the need for CO2 cartridges, the HIAC PODS+ is highly portable with improved bubble degassing capabilities for virtually unlimited field sampling. 

  • Self-diagnostic alerts
  • Sample recipe wizard
  • Paperless workflows

Especificações

Platform LPC Instruments
Performance ± 2.5% flow accuracy
Industry Standards Counts / mL, GOST 17216-2001, ISO 4406, NAS 1638, NAVAIR 01-1A-17, Raw Counts, SAE AS 4059, User Specified, Upgrade options: DEFSTAN 91-91, ASTM D7619-12
Light Source Light obscuration
Calibration Intervals and Options 1 year calibrations: ISO-11171, ISO-MTD
Particle Size Analysis Range 4 - 70 µm(c)
Coincidence Loss 5% at 40,000 particles/mL (per ISO-11171:2010 method)
Sample Volume 5 - 50 mL
Throughput 1 to 10 programmable (averaged)
Fluid Compatibility Akso Fyrquel™, Alcohols, Aldehydes, Aromatics, Diesel fuel, Esters, Ethers, Jet fuel (JP4, JP5, & others), Kerosene, Ketones, MIL-H-5606, MIL-H-83282, Marston Bentley HW 540, Mineral oil, Mobile Zerol™ 150, Monsanto Coolanol™, Monsanto Skydrol™, Shell Tellis™, Stoddard Solvent, Water
Concentration Range 0 to 40000 particles/mL
Online Operation No (Online Adapter Cup sold separately)
Tare Volumes Bottle: 5-50 mL, Online: 5-999 mL
Data Storage 3,000 individual runs
Reporting Internal printer, PDF, TSV, Raw counts, User-defined
Battery Lithium ion
Battery Operating Time 6 hours
Battery Recharge Time 4 hours
Wetted Materials Stainless Steel, Chrome plated brass, Sapphire, PEEK, PTFE, FFKM, LDPE, PODS+STD-R includes RH/T sensor materials that are unspecified
Zero Count JIS B9925:1997
Counting Efficiency Meets JIS B9925:1997
Count Alarms Display and Cycles Count, particle percent difference, coincidence, system, calibration due, Flow or system alarms output through I/O port, Data Outputs: pdf, tsv over USB, custom Modbus protocol over Ethernet and RS232
Temperature Range Charging temperature: limited to 40°C, Fluid temperature range: 0 to 90°C (at 25°C ambient), Operating temperature range: 0 to 50°C, Storage temperature range: -40 to +70°C
Humidity Restrictions 20-95% relative (non-condensing)
Power Requirements DC Input: 24 VDC, 2.5 A maximum, 100-240 VAC, 50/60 Hz, 90 W
Display 5" LCD
Operating Modes Bottle/Online/Filter Cart
Weight 9.2 kg / 20.3 lb
Width 32 cm / 12.6 in
Depth 20.3 cm / 8 in
Height 42.5 cm / 16.7 in
Color Gray
Package Quantity 1
Customers Also Viewed

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.