Viral Nucleic Acid Extraction

Content Type: Application Note
Author: Brittany A. Niccum, PhD, Beckman Coulter Life Sciences


The extraction of nucleic acids from viruses is important for both pathogen detection and microbiome discovery. Viral genomes, which can be DNA or RNA, are protected in a protein capsid that can be difficult to lyse. For research and clinical purpose it is useful to have a method of nucleic acid extraction that can lyse a range of viruses as well as bind efficiently to DNA and RNA.

The method presented here is a modified protocol using RNAdvance Blood that can extract nucleic acids from DNA and RNA viruses. By using a bead based technology, the method is amenable to automation, which is useful when dealing with large sample numbers. The method was developed with input from a customer. In this application note, we report the ability to extract DNA from samples containing HBV.


Samples were lysed by adding 200 μL of sample to 10 μL of proteinase K and 150 μL of Lysis buffer.The samples were pipette mixed 10 times followed by incubation at room temperature for 20 or 45 minutes. After lysis, the 205 μL of Bind 1/isopropanol solution, consisting of 200 μL of isopropanol and 5 μL of Bind 1, was added. The samples were incubated at room temperature for 5 minutes; immediately following the incubation the samples were placed on a magnet for 10 minutes pull down the beads. The supernatant was then removed. The beads were washed with 400 μL of Wash Buffer and placed on a magnet for 5 minutes, then the supernatant was removed. The beads were washed a second and third time with 400 μL of 70% ethanol. Following the last wash the samples remained on the magnet for 1 minute to air dry. To elute the viral nucleic acids from the beads 20 μL of nuclease free water was added. The samples were incubated for 2 minutes at room temperature, and then placed on a magnet for 2 minutes to elute the nucleic acid of interest from the magnetic beads. The supernatant was then removed for storage at -20 °C or -80 °C for long-term storage. A more detailed method is presented in the viral nucleic acid extraction supplemental protocol.

Visual Workflow

Genomics Workflow Viral Nucleic Acid Extraction Application Note

  1. Lyse sample in Lysis Buffer and Proteinase K
  2. Bind nucleic acids to magnetic beads
  3. Separate beads from contaminants
  4. Wash the magnetic beads with Wash Buffer to remove contaminants
  5. Wash the magnetic beads with 70% ethanol to remove contaminants
  6. Elute nucleic acids from magnetic beads
  7. Transfer to new plate for storage


To test whether high molecular weight RNA bound to the magnetic beads, an RNA ladder was used as input nucleic acid. RNA Marker High (45 ng) was added to 195 μL of serum substitute and the RNA ladder was purified from the sample. The samples were treated as described in the supplemental protocol to ensure that the lysis conditions would not degrade the nucleic acids. Figure 1 shows the sample input in lane 1 and after RNA isolation lanes 2-7. Lanes 2-4 show recovery after a 45 minute lysis and lanes 5-7 show recovery after a 20 minute lysis. The samples that had the 20 minute lysis had better recovery than the samples with the 45 minute lysis. This shows that high molecular weight RNA does bind to the magnetic beads and that the optimal time for lysis is 20 minutes.

The following experiments and results were conducted by Ekaterina Maiorova at the DVH, NCHHSTP,
Centers for Disease Control in Atlanta, GA.

A similar experiment was done to test whether large viral DNA fragments bind to the magnetic beads.
In HCV positive serum and in water viral DNA fragments of 500 bp, 1000 bp and 2000 bp were spiked.
The DNA was purified following the supplementary protocol. The fragments after isolation were visualized on a 2% agarose gel (Figure 2). In plasma all the fragment sizes were isolated and in the water only the 500 and 1000 bp fragments were isolated.

Viral DNA was extracted from six hepatitis B virus (HBV) positive sera using 2 different extraction kits, including the one presented here. After the extraction, a one-step PCR amplification was used to test for HBV DNA and was visualized using an Agilent 4200 Tape Station (Agilent Technologies). Amplification products were only visualized in the extractions performed with the RNAdvance Viral Supplemental protocol.


Viral nucleic acid extraction requires conditions stringent enough to open the viral capsid without degrading the RNA or DNA genome. This RNAdvance Blood supplemental protocol shows binding of high molecular weight RNA, of sizes similar to RNA genomes, and viral DNA fragments. This data shows that our protocol conditions will bind viral nucleic acids without significant RNA degradation. Additionally, DNA was isolated from six serum samples containing hepatitis B virus to verify viral lysis and performance of the method. If lysis conditions do not meet a customer’s needs than they can be optimized by the proof of principle team.

Genomics Application Note Viral Nucleic Acid Extraction Figure 1
Figure 1. An agarose gel image of an RNA ladder in lane 1. Lane 1 ladder was the input for the other 6 samples. Lanes 2-4 are the ladder after purification with a 45 minute lysis. Lanes 5-7 are the ladder after purification with a 20 minute lysis. There is less degradation of the RNA in the 20 minute lysis conditions as shown by the more distinct ladder pattern in lanes 5-7 as opposed to lanes 2-4.


Genomics Application Note Viral Nucleic Acid Extraction Figure 2
Figure 2. A 2 % agarose gel where DNA fragments of 500 bp, 1000 bp and 2000 bp were isolated from serum and water. Lane 1 has a ladder. Lanes 2- 4 are DNA fragments purified from plasma, and lanes 5-7 are DNA fragments purified from water. All fragments were purified from the plasma only the 500bp and 1000bp fragments were purified from the water.


Genomics Application Note Viral Nucleic Acid Extraction Figure 3
Figure 3. DNA was extracted from HBV positive serum using the presented RNAdvance Viral DNA/RNA supplemental protocol and another kit. Following extraction a one-step PCR amplification was performed to amplify a 500bp fragment of the HBV genome. Lanes 2, 3 and 4 showed amplification of this product indicating a positive result for extraction of HBV DNA using the control and the RNAdvance Viral DNA/RNA supplemental protocol; kit A showed no amplification indicating a negative result.


Beckman Coulter makes no warranties of any kind whatsoever express or implied, with respect to this protocol, including but not limited to warranties of fitness for a particular purpose or merchantability or that the protocol is non-infringing. All warranties are expressly disclaimed. Your use of the method is solely at your own risk, without recourse to Beckman Coulter. Not intended or validated for use in the diagnosis of disease or other conditions. This protocol is for demonstration only, and is not validated by Beckman Coulter. © 2019 Beckman Coulter, Inc. All rights reserved. Beckman Coulter, the stylized logo, and the Beckman Coulter product and service marks mentioned herein are trademarks or registered trademarks of Beckman Coulter, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

Contact Us

I consent to receiving information about Beckman Coulter webinars, products, goods, and services, including similarly related products, goods, or services from its affiliates.

By providing my contact information and submitting this form I consent that Beckman Coulter can contact me with product details and offers. We value your privacy and never sell or rent your email address to anyone. See our Privacy Policy and Terms of Use.